UTRAI Jstar 4 Car Jump Starter
Most Powerful Jump Starter
Jstar 4 Car Jump Starter 24000mAh 2500A With Safety Hammer With Wireless Charger
Jump Starter Battery Capacity: 24000mAh
Jump Starter Battery Cycle Life: ≥300 times
Jump Starter Peak Current: 2500A
Jump Starter Starting Current: 1250A
Jump Starter Car Jump Start Output: 12V
Type-C Input: 5V/3A
USB1 Output: 5V/3A, 9V/2A, 12V/1.5A
USB2 Output: 5V/2.1A
DC Output: 12V-16V/10A
Wireless Charging: 10W
Gas Engine Rating: Up to 8.0L
Diesel Engine Rating: Up to 7.0L
Operating Temperature: -20℃~+75℃
LED Light Power White: 1W
Charging Time 5V/2A Charger: 6-7h
Unite Size (L * W * H) 200mm * 92mm * 37mm
Strong Power for 12V 8.0L Gas & 7.0L Diesel
Detect Real-time Voltage Car Battery
Clear Grasp of Every Problem
Digital display of specific fault
Easily Start Up Just 3 Steps
★ Step 1: Insert the smart clamp;
★ Step 2: Connect the smart clamp to the engine battery;
★ Step 3: Start your engine;
Use 50 Times Per Once Charge
High Capacity: 24000mAh
Digital Display
Check battery level at any time
18W Quick Charge
Type-C Input: 5V/3A
Jump Starter Car Jump Start Output: 12V
USB1 Output: 5V/3A, 9V/2A, 12V/1.5A
USB2 Output: 5V/2.1A
DC Output: 12V-16V/10A
10W Wireless Charger
Jump Starter Battery Capacity: 24000mAh
Jump Starter Peak Current: 2500A
Wireless Charging: 10W
Emergency & Traveling LED Flashlight
★ Normal Light
★ SOS Light
★ Strobe Light
A Car Windows Breaker Tool
Compass for your car
Use even extreme temperatures from-20℃ to 75℃.
Full packages including:
1* Jump Starter
1* Smart Clamps
1* USB To Type-C Cable
1* Carrying Case
1* User Manual
How To Charge Your Jump Starter?
Type C Charging your Jump Starter anywhere
4-5 hours full Charging
★ At Home :
1. Plug the USB cable into computer or any USB 2A wall adaptor (not included).
2. Connect the Type-C port into the Jump Starter.
★ In Car :
1. Plug the car adaptor (not included) into the socket.
2. Connect the Type-C port into the Jump Starter.
★ Outdoor :
You can use the solar charging panel to charge the jump starter,
but pls confirm the output voltage/current is ≤DC 5V/3A,
otherwise the jump starter will enter the protection state.
Fine more new interesting products here: